Don’t know what all I need to rebuild my transmission completely
Anonymous
1 year ago
Transmission just downshift while I’m driving rpm hands goes up 3k rpm
RACHELLE HOWARD
2 years ago
slipping after I changed the fluid.
Ayoub turay
2 years ago
Transmission is slipping gears
Cale Zwegers
2 years ago
I beleive 2nd and 4th gears have quit working.
Derek
2 years ago
Will not shift from 2nd to 3rd gear
Eddie Curtis
2 years ago
Starts out fine , through all gear ranges. Then shortly after slips to a stop Turn key off, restart engine, take off and the same. Changed fluid and filter from pan. Added stop slip Lucas and was fine for a few days. Started slipping between 2 and 3 after filter and fluid change with additive.
jessica campas
2 years ago
i have reverse. but no drive forward
Scott
2 years ago
My 2005 danali xl AWD is not shifting out of 1st gear.
David
2 years ago
Hesitates between 2nd and 3rd shift
LEE SPEARMAN
2 years ago
WHEN YOU START OFF IT SEEMS TO SLIP. ONLY IN LOW GEAR
Lucas
3 years ago
When I need to get to a higher speed quickly, (merging onto the highway). My Yukon revs high like it’s in neutral and doesn’t want to shift into a higher gear right away . Even from a dead stop it will do it if you step on the gas too quickly or hard . Vehicle is a 2005 GMC Yukon Denali awd with the 6.0.
Crystal J Hysell
3 years ago
Was told Need a new transfer case, lots of clanking noise and shutters when driven occasionally
Stopped working suddenly
I have 1st and 3rd
no 1st or 4th gear
The truck quit pulling
Don’t know what all I need to rebuild my transmission completely
Transmission just downshift while I’m driving rpm hands goes up 3k rpm
slipping after I changed the fluid.
Transmission is slipping gears
I beleive 2nd and 4th gears have quit working.
Will not shift from 2nd to 3rd gear
Starts out fine , through all gear ranges. Then shortly after slips to a stop Turn key off, restart engine, take off and the same. Changed fluid and filter from pan. Added stop slip Lucas and was fine for a few days. Started slipping between 2 and 3 after filter and fluid change with additive.
i have reverse. but no drive forward
My 2005 danali xl AWD is not shifting out of 1st gear.
Hesitates between 2nd and 3rd shift
WHEN YOU START OFF IT SEEMS TO SLIP. ONLY IN LOW GEAR
When I need to get to a higher speed quickly, (merging onto the highway). My Yukon revs high like it’s in neutral and doesn’t want to shift into a higher gear right away . Even from a dead stop it will do it if you step on the gas too quickly or hard . Vehicle is a 2005 GMC Yukon Denali awd with the 6.0.
Was told Need a new transfer case, lots of clanking noise and shutters when driven occasionally